home *** CD-ROM | disk | FTP | other *** search
- Path: toad.stack.urc.tue.nl!not-for-mail
- From: jaco@stack.urc.tue.nl (Jaco Schoonen)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: WSpeed locks system
- Date: 28 Mar 1996 17:59:43 +0200
- Organization: MCGV Stack, Eindhoven University of Technology, the Netherlands.
- Message-ID: <4jed1f$r5l@toad.stack.urc.tue.nl>
- References: <838.6661T539T1180@ibm.net>
- NNTP-Posting-Host: toad.stack.urc.tue.nl
- X-Newsreader: TIN [version 1.2 PL2]
-
- Georges Heinesch (geohei@ibm.net) wrote:
- : Hi.
-
- : I tried to measure the speed of my CV64/4 recently and tried to use WSpeed
- : 1.4. After I started the "Make Module" option, the system locked. The mouse
- : was stuck and the entire system was locked, except for WSpeed. It continued
- : to "Put Pixels" on a 1024x768x8 screen.
-
- : This lockup happened in every CV mode, but only when putting pixels (first
- : test). The screen resolution have no influence, but it only happens with 3
- : or 4 Bitplanes, never with 1 or 2 (at least so far not).
-
- The same happens here, usually in the 4 color screen already. I tried
- several times, but at some point WSpeed just doesn't time-out and keeps
- testing.
-
- : Is this problem due to WSpeed, or some other hack ?
-
- I hope it's WSpeed, although I don't think it's more than a loop with
- PutPixel() in it, waiting for a timeout.
-
- : Is there any other graphics card speed measuring software ?
-
- SysSpeed has a graphics test part.
-
-
-
- --
- Jaco Schoonen
- (jaco@stack.urc.tue.nl)
-